Mixer 1000 liter drum with an automated control system

Shtolverk Company develops, manufactures and sells drum mixers of various designs and modifications for the food, cosmetic, pharmaceutical, paint, chemical and other industries.

The mixer drum

Hopper capacity m3 / liter - 1.0 / 1000
Hopper material Stainless steel - AISI304
Material shaft, coupling and damping capacity of the basket mount stainless steel AISI304
Material mixer frame Carbon steel - ST3.
Mixer Drive - gear motor 2,2 kW, 28 rev / min max.
Dimensions (mm maximum): 2150 length, width 1500 height 1950.
Weight of the empty blender (Kg max): 350.

The control panel is equipped with a drum mixer:

a timer for controlling the time of mixing in a wide range.

automatic container positioning system in the loading / unloading.

control mixer speed in a range from zero to maximum.

audible and visual indication of the end of the mixing process.

Technical features of the drum mixer:

• Cover seal silicone ring around the perimeter.
• The mixer is equipped with a protective frame restrictive workspace control. The front part of the frame is raised load / unload the mixed product. The proximity sensor provides the mixer stops when you try to raise the frame, or does not turn on when the mixer is not lowered guards.
• If necessary, stop the mixer is possible to download additional components in the mixing process. The total mixing time of the timer remains unchanged.
• In addition to automatic container positioning system in the loading / unloading has a manual for self-refinement select the desired position.
• The mixer can be used not only for the mixing of dry components but also as churn for batchwise cooking oil.

Принцип работы барабанного смесителя:

• The operator loads the necessary amount of ingredients in the mixer and the hopper lid closes.
• Lowering the protective fence frame sets a timer in front of the required mixing time control cabinet and presses the "start".
• Mixer smoothly accelerates the hopper to a pre-selected number of revolutions.
• If necessary, add additional components the operator presses the button "pause", waiting for soft stop mixer and pressing the "refinement" resulting in a hopper mixer convenient loading position.
• After loading the operator lowers the bounding box and presses the "start".
  
  Faucet run for the amount of time set on the timer, slow speed and setting the hopper position loading / unloading will give a light signal.

Additional equipment:

Any equipment can be equipped with additional snap in any volume and configuration: