KVE-1000L - Siropovarka 1000 liter

Shtolverk Company develops, manufactures and sells siropovarki, siropovarochnye boilers of various designs and modifications for the food, cosmetic, pharmaceutical, paint, chemical and other industries.

Technical characteristics and technical features siropovarki KVE-1000L:

The volume of the cooking container m3 / liter - 1/1000;

The material of the cooking container stainless steel - AISI304;

Material shaft, heating jacket, supports capacity stainless steel - AISI304;

The drive of the mixing device (gearmotor) 2.2 kW, 24 rev / min max;

Dimensions (mm maximum) height 2140 1200 diameter;

Weight of the empty tank (max kg): 450.

 Remote control and operation procedures siropovarki:

siropovarkoy control system includes a heating control subsystem and a stirrer.

Siropovarka of heaters equipped with heaters. Thus, teploelektronagrevateli (heating elements) are arranged in the lower part of the boiler and are divided into four groups, each 15 kW total power of 60 kW. The group consists of three heating element rated at 5 kW. Connecting heaters one group carried out on a "star" without neutral conductor.

To start the heating process must be set the appropriate check boxes "heat" in the "on" position pre-select manual or automatic mode. On the outside of the control cabinet, in addition, temperature control and operation of the control buttons of the mixing device, there are three heating control. Each of them is responsible for a group of heaters, with one of them includes heaters 30 kW of power, and the remaining 15 kW each.

Prolonged use of heaters, as well as moments of inclusion governs dual-channel temperature controller, the display is
It shows the actual temperature and the set point of the operator and the electronic timer. Driving control box is designed in such a way that half power allows disabling the heating elements when the temperature of the product set by the operator to continue the process of cooking and the timer for a predetermined time. Upon reaching the predetermined time, heating is stopped and fed to a light and sound signal. Our heating subsystem scheme of work is characterized by high reliability, can guarantee to avoid such an effect as the inertia of the heating process, shirt, and, consequently, avoid overheating of the product above the values ​​established by the operator.

Unloading of the finished syrup, made a special pump with cooling. Operated Pump Pump buttons "start" and "stop" on the front panel of the control cabinet.

The electric motor of the mixing device is controlled by a "start" button and "stop". Moments on and the duration of the motor determines the operator. RAMS mixing device equipped with PTFE scrapers allows more rapid and uniform heating of the product.

All controls and displays siropovarochnym pot brought to the outside of the cabinet door. The order of their location due to a sequence of process steps performed, the information reading convenience of the operator, as well as aesthetic considerations. When triggered, the actuators (in this case, engine heaters and mixing device), but also when the power switch, there is a corresponding control body highlighting bulb.

All of the control cabinet circuit (including power circuits heaters) have built-in short circuit protection. A chain of power units (motor stirring device) in addition to the short-circuit protection are also protected against overload, phase unbalance, excessive starting time and locked rotor.

Additional accessories: Any equipment at the customer's request can be equipped with additional snap in any volume and configuration: - Fully automatic control system with touch panel with TOUCH-general industrial multi-channel programmable controller for full control and management, temperature, time and mixing modes, as well as the management of pumping and homogenizing equipment. - audible and visual alarm system - system of protection against "dry run" - timers and time switches - The system is monogamous or tiered as well as combined heating / cooling - circulation pumps for high-temperature heat carrier Level sensors (mechanical, ultrasonic, laser, Pressure transducers) - strain gauges - Automatic vacuum or injection systems, as well as injection of steam into the product - mixing devices and high-speed low-speed, any configuration. - high-temperature food, including and self-priming pumps homogenizers and own production

Сommercially available:
	Kettles		Girolametto
	Mixers industrial		Dissolvers
	Process tanks		Vacuum equipment
	Different		Pumps and homogenizers
	Laboratory equipment