Mixer type drunken barrel under the replaceable container

Shtolverk Company develops, manufactures and sells faucets drunken barrel under the replaceable containers of various designs and modifications for the food, cosmetic, pharmaceutical, paint, chemical and other industries.

Scope mixer type "drunken barrel" under the replaceable container

Mixer "drunken barrel" with a removable containers used in the food, pharmaceutical, chemical, cosmetic and many other industries.

Appointment mixer type drunken barrel under the replaceable container. Application mixer significantly reduces the time of mixing the components and allows to achieve high quality mixing. Mixer "drunken barrel" is used for the mixing of liquid components and for mixing solid pulverulent or granular components to form homogeneous mixtures according to the principle of processing soft (non destructive effect).

The principle of operation of the mixer type drunken barrel.

The principle of operation of the mixing device drunken barrel under the replaceable container based on the mixing of the components by their multiple oversleeping (transfusion) in the amount of a rotating cylindrical vessel, fixed at a certain angle. Mixing components occurs due to gravity.

Mixer device such as drunken barrel under the replaceable container.

There are several variants of mixers such as drunken barrel:

1. The first type of mixer is a cylindrical container mounted on the frame and provided with an angle of rotation with the drive gear motor. In this type of mixer rotary shaft is attached to barrel holder. In this case, the capacity of the mixer is equipped with a reliable fastening device packaging. Removable stainless steel tanks can be produced in our company, with the shape and dimensions of tanks are specified by the customer.

2. The second type of mixer is a cylindrical container mounted at an angle and placed in the holder as a squirrel cage. container holder is caused to rotate by means of two special clips attached to the shaft. Removable stainless steel tanks can be produced in our company, with the shape and dimensions of tanks are specified by the customer.

The design of the mixer of the "drunken barrel" is made of stainless steel. For safety reasons, these types of faucets around the perimeter fitted with a protective frame with a limit switch. When lifting frame stops rotating mixers. Also mixers are equipped with finishing system that allows the container unloading unit down.

 

Additional accessories: Any equipment can be equipped with additional snap in any volume and configuration: • Fully automatic control system with touch panel with TOUCH-general industrial multi-channel programmable controller for full control and management, temperature, time and mixing modes, as well as the management of pumping and homogenizing equipment. • audible and visual alarm system • system of protection against "dry run" • timers and time switches • The system is monogamous or tiered as well as combined heating / cooling • circulation pumps for high-temperature heat carrier Level sensors (mechanical, ultrasonic, laser, Pressure transducers) • strain gauges • Automatic vacuum or injection systems, as well as injection of steam into the product • mixing devices and high-speed low-speed, any configuration. • high-temperature food, including and self-priming pumps homogenizers and own production

Смеситель типа «пьяная бочка» изготавливается любых объемов и комплектаций.

	CM-PB Mixer drunken barrel under the replaceable container		CCK-SPB Mixer universal drunken barrel under the replaceable container cantilever
	SPB 50l ACS - Mixer drunken barrel for the pharmaceutical company, polished removable containers 50 liters		SPB 50l ACS - Mixer drunken barrel, removable containers of 50 liters with Automated Management System

Commercially available:
	Kettles		Fat melter
	Mixers industrial		Dissolvers
	Process tanks		Vacuum equipment
	Different		Pumps and homogenizers
	Laboratory equipment