Mixer type drunken barrel with a stationary container

Shtolverk Company develops, manufactures and sells faucets drunken keg of various designs and modifications for the food, cosmetic, pharmaceutical, paint, chemical and other industries.

Scope mixer «drunken barrel» with a stationary container.

Mixer «drunken barrel» with a stationary container used in food, pharmaceutical, chemical, cosmetic and many other industries.

Appointment mixer drunken barrel with a stationary container.

Mixer drunken barrel used for mixing liquids, as well as for the preparation of homogeneous mixtures of solid, granular or powder components on the basis of the soft processing (without the damaging effects). The use of the mixer drum drunk significantly reduces the time of mixing the components and allows to achieve high quality mixing.

The principle of operation of the mixer «drunken barrel» with a stationary container.

Mixing components occurs due to gravity. The principle of operation of the mixer drunken barrel under the fixed capacity is based on mixing the product through its multiple oversleeping (transfusion) in the amount of a rotating cylindrical vessel, fixed at a certain angle.

Mixer Device «drunken barrel» with a stationary container.

There are several variants of mixers such as «drunken barrel»:

1. The first type of mixer is a cylindrical container mounted on the frame and provided with an angle of rotation with the drive gear motor. In this type of mixer horizontal rotary shaft attached to the generatrix of the cylindrical surface of the drum. Fixed (non-removable) mixing container has a sealed assembly (sunroof, gate valve) loading and unloading of the components of the finished product.

2. The second type of mixer is a cylindrical vessel, mounted at an angle and placed into the holder in appearance reminiscent of squirrel cage. container holder is rotated by means of special rollers, fixed on a shaft fixed to the motor-reducer. Fixed (non-removable) mixing container has a sealed assembly (sunroof, gate valve) loading and unloading of the components of the finished product.

The design of the mixing device of the «drunken barrel» is made of stainless steel. For safety reasons, these types of faucets around the perimeter fitted with a protective frame with a limit switch. When lifting frame stops rotating mixers. Also mixers are equipped with finishing system that allows you to set the capacity at the required angle.

 

Additional accessories: Any equipment can be equipped with additional snap in any volume and configuration: • Fully automatic control system with touch panel with TOUCH-general industrial multi-channel programmable controller for full control and management, temperature, time and mixing modes, as well as the management of pumping and homogenizing equipment. • audible and visual alarm system • system of protection against "dry run" • timers and time switches • The system is monogamous or tiered as well as combined heating / cooling • circulation pumps for high-temperature heat carrier Level sensors (mechanical, ultrasonic, laser, Pressure transducers) • strain gauges • Automatic vacuum or injection systems, as well as injection of steam into the product • mixing devices and high-speed low-speed, any configuration. • high-temperature food, including and self-priming pumps homogenizers and own production

Mixer type drunken barrel is made of any volumes and complete sets.

	CCK-Pb300l ACS - Mixer drunk a barrel of 300 liters with a stationary container		CCK-Pb100l ACS - Mixer drunken barrel 100 liters with a stationary container
	CCK-Pb250l ACS - Mixer drunken barrel 250 liters with a stationary container

Commercially available:
	Kettles		Fat melter
	Mixers industrial		Dissolvers
	Process tanks		Vacuum equipment
	Different		Pumps and homogenizers
	Laboratory equipment