Universal laboratory mixer

Application laboratory mixer. Main products.

Laboratory mixer used to produce small batches thoroughly mixed solids and liquids.

 Appointment laboratory mixer.

In the laboratory mixer type can conduct a thorough mixing of different products in the laboratory of food, chemical, pharmaceutical, cosmetic and other industries.

 The principle of operation of the laboratory mixer.

Mixing the product occurs in the laboratory by repeated oversleeping during rotation in a closed volume obliquely installed capacity. Further, to intensify the mixing process, the blades can be fitted with holes. When you rotate the tank installed at an angle to the axis of rotation of the product moves along a complex trajectory further marked change in the way the blades flows.

Devices laboratory mixer.

The main unit of the laboratory mixer, a universal drive to the attachment mounting system. Drive, support assemblies and controls are placed in a polished stainless steel enclosure. Through the use of universal design in the assembly of attachments mount mixer, significantly extend the functionality and operational characteristics.

The main types of mixing tanks laboratory mixer:

Laboratory Y (V) - 0.5 liter blender; - 10l.

Laboratory mixer barrel drunk 0.5 liters; -10l.

Laboratory drum mixer 0.5L; -10l.

Laboratory bikonusny (double cone) mixer 0.5L; -10l.

 Containers of all sizes in the standard version are made of stainless steel. Upon request, the container can be made of carbon steel or another type of polymer or material. For use with corrosive fluids can be applied lining surfaces wetted.

When used as part of third-party equipment attachments manufactured with the required customer mounting dimensions and valves.

The main drive in the basic version is equipped with: a magnetic starter with thermal relay to turn on the engine load engine - gearbox, frequency converter allowing smoothly, without jerks, run the attachment rotation. In addition to the above functions without frequency converter allows stepwise regulate shaft speed in the range from zero to maximum.

The buttons "START" and "STOP" trigger if the mixing process is stopped. Additionally, if necessary, can be equipped with the following components: an electronic timer for mixing at the specified time, the sensor attachment position, the ability to install equipment on the "pause" button to additional components.

 In the production of mixers for laboratories and laboratory tests are used only high quality materials and components from leading manufacturers. Using the best technology a natural criterion in the machining department, which allows us to achieve consistently high product quality

Additional accessories:

Any equipment can be equipped with additional snap in any volume and configuration:

• Fully automatic control system with touch panel with TOUCH-general industrial multi-channel programmable controller for full control and management, temperature, time and mixing modes, as well as the management of pumping and homogenizing equipment.
• audible and visual alarm system
• system of protection against "dry run"
• timers and time switches
• The system is monogamous or tiered as well as combined heating / cooling
• circulation pumps for high-temperature heat carrier
Level sensors (mechanical, ultrasonic, laser,
Pressure transducers)
• strain gauges
• Automatic vacuum or injection systems, as well as
injection of steam into the product
• mixing devices and high-speed low-speed, any
configuration.
• high-temperature food, including and self-priming pumps
homogenizers and own production