+7(495)722-02-46 zakaz@shtolverk.ru |
Technology
equipment |
KVE-100L - Siropovarochny boiler 100 liters with electric heating.
Specifications and technical features siropovarki KVE-100L: Time of heating capacity from 16 ° C to 90 ° C is 20 minutes; The volume of the cooking container m3 / liter - 0.1 / 100; The material of the cooking container stainless steel - AISI304; Material shaft, heating jacket, supports capacity stainless steel - AISI304; The drive of the mixing device (gearmotor) 1.5 kW, 28 rev / min max; Dimensions (mm maximum) height 1550 in diameter 700; Weight of the empty tank (max kg): 130. Remote control and operation procedures siropovarochnogo boiler: Control system according siropovarochnym boiler includes a heat control subsystem, and a stirrer. Siropovarka of heaters equipped with heaters. Thus, teploelektronagrevateli (heating elements) are arranged in the lower part of the boiler and are divided into two groups of each 15 kW total power of 30 kW. The group consists of three heating element rated at 5 kW. Connecting heaters one group carried out on a "star" without neutral conductor. To start the heating process must be set the appropriate check boxes "heat" in the "on" position. On the outside of the control cabinet, in addition, temperature control and operation of the control buttons of the mixing device, there are two heating control. Each of them is responsible for one group of heaters. Prolonged use of heaters, as well as moments of inclusion governs dual-channel temperature controller, which is indicated on the display and the current temperature setpoint of the operator. Our heating subsystem scheme of work is highly reliable and can guarantee to avoid such an effect as the inertia of the heating process, shirt, and, consequently, avoid overheating of the product above the values established by the operator. The electric motor of the mixing device is controlled by a "start" button and "stop". Moments on and the duration of the motor determines the operator. Mixing device allows for a more rapid and uniform heating of the product. All controls and displays siropovarochnym pot brought to the outside of the cabinet door. The order of their location due to a sequence of process steps performed, the information reading convenience of the operator, as well as aesthetic considerations. When triggered, the actuators (in this case, engine heaters and mixing device), but also when the power switch, there is a corresponding control body highlighting bulb. All of the control cabinet circuit (including power circuits heaters) have built-in short circuit protection. A chain of power units (motor stirring device) in addition to the short-circuit protection are also protected against overload, phase unbalance, excessive starting time and locked rotor. General description, scope, purpose, principle, basic design and accessories with an electric boiler siropovarochnogo (TANS) heating
|
|