Shtolverk Company develops, manufactures and sells fat melters various designs and modifications for the food, cosmetic, pharmaceutical, paint, chemical and other industries.

Zhirotopka is a three-layered rectangular container. The first and the second layer form a heating jacket with built-in electric heaters (heating elements). The shirt is poured in between the coolant. As the coolant is usually used glycerine food which is unlike water and less susceptible to evaporation has a boiling point above 200 ° C. Between the second layer and the outer decorative installed insulating layer reduces heat losses and therefore reduces power consumption.

Top mounted heated melting grid for the installation of fat blocks. The array of the shirt is pumped via the heated heating medium heats the tube sheet which in turn transfers heat set fatty block. Molten product falls into a container and remains in the heated state before the transfer into production.

Zhirotopka has a casing which protects against ingress of foreign objects into the molten product.

Pumping product manufactured impeller pump with a heating jacket heated by pipes prevents freezing of the product.

Specifications fat melter

Power electric heaters - 30 kW (two blocks of 15 kW with the possibility of differential inclusion).

Pump motor power 0.75 kW.

Grill for a one-time installation of four blocks of fat.

Dimensions:

The length of the assembly to the pipes and pump - 1800 mm

The width of 1000 mm.

The height of the assembly to the housing 1200 mm.
Material execution of stainless steel AISI 304 (Standard 08H18N10)

Additional equipment:

Any equipment can be equipped with additional snap in any volume and configuration: