Plow-mixer is designed to produce mixtures of one or more dry particulate components, applying liquid fillers with a uniform distribution of the granular base, heating the resulting mass to intensify the fermentation and drying process.
Рlow-mixer control panel is equipped with:
the system maintain the set temeratury
control system mixing device with soft start and speed control;
unloading auger control system with adjustable discharge rate;
Design and working principle: Loading of the mixture components is possible both through the central part of the hatch of the mixer, and through the feed pipe with a flange for fixing any type of conveyor or hopper.
Adding liquid components occurs through nozzles integrated into the manifold and connected to the supply tank or pump.
Mixing occurs rotating working elements - plows, which follows the path of rotation of the inner contour of the mixer tank. The shape and size of plows may vary when using different products. The rotational speed of the mixing device can be changed by chestotnogo converter manipulated on the front panel of the cabinet.
Heating / cooling jacket is divided into three sections isolated from each other and having a built-in sensors showing temeratury turnouts.
The main heating source is fed into the steam jacket. Steam is produced through the collector in the upper part of the mixer separately in each section. Any of the sections can optionally be disconnected from the steam by perkrytiya cranes on supply nozzles.
Heat may also be generated by electric heating elements installed in a special box TENovye communicating with the shirt. Since the work of heaters is not possible in the absence of the heated environment that will lead to their failure, the presence of coolant sensors kotroliruetsya presence of coolant float type. For heating units use heaters - TENb sostoyashie three heaters each. Skem turn allows, if necessary, include differentially heating elements - separate one for each section of the shirt.
Drying of the final product is carried out through the hot air inlet at the bottom on one side and outlet side above the other nozzles.
If necessary, the product can be cooled. For this, the bottom of plugoobraznrgo mixer inlet manifold is provided in the coolant jacket.
Unloading of the finished product is produced through a discharge pipe lockable sliding gate. The product through the open gate enters the screw conveyor with adjustable discharge rate.
mixer has the ability to heat both the steam and electricity;
shirt is divided into three sections allow you to control the heating in each section separately;
organization for jacketed cooling introduced cold water supply nozzles;
in the side walls two flanged pipe for supplying hot air and steam outlet installed;
to control the temperature in each section of the heating jacket / cooling mounted thermometer;
discharging through the discharge window into the central part of the mixer, fitted with the slide valve and the screw conveyor;
at the top of the mixer pipes installed for liquid components;
service hatch is equipped with pneumatic shock absorbers to facilitate recovery;
There are holes for mounting on a support tenzometricheskie;
All connections are made with flanged connections for connecting the inlet and outlet of highways;
Any equipment can be equipped with additional snap in any volume and configuration:
• Fully automatic control system with touch panel with TOUCH-general industrial multi-channel programmable controller for full control and management, temperature, time and mixing modes, as well as the management of pumping and homogenizing equipment.
• audible and visual alarm system
• system of protection against "dry run"
• timers and time switches • The system is monogamous or tiered as well as combined heating / cooling • circulation pumps for high-temperature heat carrier Level sensors (mechanical, ultrasonic, laser, Pressure transducers) • strain gauges • Automatic vacuum or injection systems, as well as injection of steam into the product • mixing devices and high-speed low-speed, any configuration. • high-temperature food, including and self-priming pumps homogenizers and own production