Apparatus for melting fat with steam heating.

Shtolverk Company develops, manufactures and sells zhiroplaviteli various designs and modifications for the food, cosmetic, pharmaceutical, paint, chemical and other industries.

Scope melter fat round with steam heating.
Melter fat round (melter oil zhiroplavitel, maslotopka, masloplavitel) with a steam heating jacket is used, as a rule, in the food industry for the preparation of the combined oils, ice cream, margarine, chocolate melting, preparation of condensed milk and a variety of fillings. In the pharmaceutical and cosmetic industries round zhirotopki used in the processes of preparation of creams, lubricants, ointments, etc.

Appointment fat melter round with steam heating.
In the food industry round fat melter with steam heating is used for heating process different kinds of fat are frozen or solid state.

The principle of a round fat melter with steam heating.
The operating principle of the grease trap is melted product in order to impart desired properties (temperature, viscosity). The product is placed on a heated tube sheet. Gradually melts, it flows through the bars at the bottom of an inclined circular zhirotopki. The grille and sloping bottom are heated by steam or an intermediate heat transfer medium (depending on version) in order to avoid further cooling and as a result of hardening of the product. The process product has a melting temperature and the viscosity required for subsequent use in production.

Grease trap device round with steam heating.
All components directly zhirotopki made of stainless steel. The design is carried out under the scheme zhiroplavitelya three-layer capacity when using a coil, or a two-layer circuit capacity, if used strips. In the case of using a coil made of a pipe, and the average zhiroplavitelya inner walls form a shirt, which is filled intermediate coolant. In this case, the heating occurs at an intermediate heat transfer medium passing through the coil pair. In the cavity between the middle and outer walls is a heat insulating material having a dual purpose.
Firstly, when using the heat losses are significantly reduced, and practically all the heat is transferred to the product.
Во-вторых, наружная стенка жиротопки не нагревается до высокой температуры, что позволяет избежать ожогов персонала.
Secondly, the outer wall zhirotopki not heated to a high temperature, thereby avoiding burns personnel. The design of the top of the zhiroplavitelya with steam heating provides a heated removable grille made of square tubes. The size and shape of the lattice and the size and shape of the lattice cell performance caused by steam zhiroplavitelya and dimensions of the block of frozen product. Steam zhirotopki grille made of stainless steel tube and is made in the quick release version. To prevent heat loss, as well as to protect against splashing over the tube sheet set protective casing with a door providing the ability to upload product units. Internally bottom zhirotopki has an angled shape, which can significantly facilitate the discharge of the product melt.
Fat melter is equipped with a steam jacket heating control panel provided on the basis of the temperature-control meter.

Additional accessories: Any equipment can be equipped with additional snap in any volume and configuration: • Fully automatic control system with touch panel with TOUCH-general industrial multi-channel programmable controller for full control and management, temperature, time and mixing modes, as well as the management of pumping and homogenizing equipment. • audible and visual alarm system • system of protection against "dry run" • timers and time switches • The system is monogamous or tiered as well as combined heating / cooling • circulation pumps for high-temperature heat carrier Level sensors (mechanical, ultrasonic, laser, Pressure transducers) • strain gauges • Automatic vacuum or injection systems, as well as injection of steam into the product • mixing devices and high-speed low-speed, any configuration. • high-temperature food, including and self-priming pumps homogenizers and own production

Commercially available:
	Kettles		Fat melter
	Mixers industrial		Dissolvers
	Process tanks		Vacuum equipment
	Different		Pumps and homogenizers
	Laboratory equipment