Twin-rotor mixer with heating jacket

Shtolverk Company develops, manufactures and sells two-rotor mixers of various designs and modifications for the food, cosmetic, pharmaceutical, paint, chemical and other industries.

Application of double-rotor mixer with a heating jacket.

Twin-rotor mixer with heating jacket are widely used in the food industry. In addition to the food mixer with two horizontal shafts are used in the pharmaceutical, chemical, cosmetic and other industries.

Appointment twin-rotor mixer with heating jacket.

Twin rotor mixers used for mixing different components of dispersion, the solid granular or particulate components having a large difference in the specific gravity and the blending proportions. Also, this type of mixer used successfully by mixing dry ingredients with the addition of some fluid, stirring products with varying degrees of viscosity.

The principle of double-rotor mixer with a heating jacket.

The operating principle of a two-shaft mixer is mixing the feed raw materials due to the rotation of the two working bodies. As working special mixing blade elements of various shapes can be used mounted on the shaft at a certain angle can also be used ribbon spiral shape wound on the shafts, Z-shaped tape, etc. View work items depends on the type of components to be mixed.

The device twin-rotor mixer with a heating jacket.

Twin-rotor mixer with heating jacket is a three-layer container in which the work items are placed.

The space between the inner and middle layers (jacket) filled with coolant (water, glycerol or food), heated by means teploelektronagrevateley (heaters). The cavity formed by the middle and outer layers, filled with insulating material to minimize heat loss and to ensure the protection of personnel from thermal burns. As working special mixing blade elements of various shapes can be used mounted on the shaft at a certain angle can also be used ribbon spiral shape wound on the shafts, Z-shaped tape, etc.

Type working elements, their shape, pitch, presence of additional blades on the shaft determined by the type of components to be mixed. The capacity of the mixer is fixed on a frame mounted on height-adjustable supports. At the bottom of the mixer is equipped with a discharge unit components (hatch, gate valve). To ensure safe operation of the capacity of two-shaft mixer equipped with a hinged cover (or coarse grating) equipped with a limit switch. The rotation of the mixer shaft when lifting the lid stops. The design of twin-rotor mixer made of stainless steel.

 

Additional accessories: Any equipment can be equipped with additional snap in any volume and configuration: • Fully automatic control system with touch panel with TOUCH-general industrial multi-channel programmable controller for full control and management, temperature, time and mixing modes, as well as the management of pumping and homogenizing equipment. • audible and visual alarm system • system of protection against "dry run" • timers and time switches • The system is monogamous or tiered as well as combined heating / cooling • circulation pumps for high-temperature heat carrier Level sensors (mechanical, ultrasonic, laser, Pressure transducers) • strain gauges • Automatic vacuum or injection systems, as well as injection of steam into the product • mixing devices and high-speed low-speed, any configuration. • high-temperature food, including and self-priming pumps homogenizers and own production

Commercially available:
	Kettles		Fat melter
	Mixers industrial		Dissolvers
	Process tanks		Vacuum equipment
	Different		Pumps and homogenizers
	Laboratory equipment

Twin-rotor mixer with heating jacket is made of any volumes and complete sets.